Product Specifications
Specification | Details |
Blade Diameter | 305mm / 12″ |
Number of Teeth | 100T |
Arbor Size | 25.4mm / 1″ |
Kerf Width | 3.0mm / 1/8″ |
Tooth Material | TCT |
Tooth Geometry | GCG |
Max. Safe Speed | 5000 rpm |
Reduction Ring | 20mm / 3/4″ |
Cutting Result | Fine Cut |
Compatible Machines
Application
Safety Instructions
Eye protection
Please wear safety glasses
Hand Protection
Please wear protective gloves
Proper Disposal
Dispose of damaged or worn blades safely
Respiratory Protection
Please wear face respiratory mask
Frequently Asked Questions
The 100-tooth blade has small, dense teeth, aluminum tends to gum up blades, and the 12" diameter has high inertia – making proper maintenance and safe operation especially critical.
Longevity & cutting tips:
- Always use lubrication: Lubrication is strongly recommended when cutting aluminum. Use a dedicated saw blade wax stick or a misting lubrication system. Lubrication reduces aluminum build-up, lowers friction heat, extends blade life, and delivers a smoother finish.
- Choose the right feed speed: Thicker or harder aluminum requires a slower feed rate. Do not force the workpiece – let the blade cut at its own pace. The 12" blade has higher resistance; excessive pressure can overload and chip the carbide tips.
- Clean regularly: Aluminum chips can stick to the tooth gullets ("loading"), affecting chip evacuation and cut quality. Clean debris from between teeth regularly.
- Use the right blade for the right material: This blade is for non-ferrous metals and non-metallic materials only – never use it on steel, stainless steel, or ferrous metals. Cutting ferrous metals will directly damage the carbide tips.
- Regular inspection and sharpening: If cutting speed drops or finish becomes rough, check for chipped or worn teeth. For 12" blades, we recommend CNC sharpening for precise tooth geometry consistency.
Safety precautions (critical):
- Confirm max RPM: Machine speed must not exceed 4,500 RPM. Over-speeding a 12" blade is a serious safety hazard – this must be strictly followed.
- Keep guards in place: Metal cutting produces high-velocity chips – always keep machine guards installed.
- Wear full PPE: Safety goggles (for metal chips), ear protection (12" blades are loud), dust mask, and gloves.
- Inspect the blade: Check for cracks, warping, or missing teeth before each use. Damage to a 12" blade is extremely serious – never use a damaged blade!
- Tighten securely: Ensure flanges are at least 1/3 of the blade diameter (approx. 100mm), bolts are tightened, and the blade is concentric with the arbor.
Here are the key specifications of this product:
| Specification | Detail |
|---|---|
| Blade Diameter | 12" (305mm) |
| Teeth Count | 100 Teeth |
| Arbor Size | 1" (25.4mm) |
| Max RPM | 4,500 RPM |
| Tooth Grind | TCG (Triple Chip Grind) |
| Kerf Width | Approx. 0.110–0.126" (2.8–3.2mm) |
Compatible Equipment:
- Large Table Saws
- Mitre Saws
- Chop Saws
Before installation, confirm these three points:
- Arbor match: Your machine's arbor must be 1" (25.4mm). If your machine has a different arbor size (e.g., 5/8" or 30mm), you may need a reduction ring (arbor adapter) .
- Max RPM: Your machine's no-load speed must not exceed 4,500 RPM. A 12" large-diameter blade generates enormous centrifugal force at high speeds – over-speeding is extremely hazardous and will severely shorten blade life.
- Equipment type: This blade is designed for woodworking-type saws (table saws, mitre saws, etc.) – not for low-speed cold saws or hand-held circular saws.
This 12" (305mm) 100-tooth carbide-tipped circular saw blade is engineered for high-precision, burr-free cutting of non-ferrous metals. It performs best on aluminum extrusions, aluminum sheets, aluminum bars, die-cast aluminum, copper, brass, bronze, and other non-ferrous metals. It is also suitable for plastics, Plexiglass, PVC, acrylics, and similar materials.
Core advantages of 100 teeth:
- More teeth mean less material removed per tooth, resulting in a smoother finish.
- The TCG (Triple Chip Grind) tooth geometry (alternating trapezoidal and flat teeth) is specifically optimised for non-ferrous metals, effectively reducing burr formation and delivering clean, smooth cuts that require virtually no secondary finishing.
Unique advantages of the 12" (305mm) large diameter:
- Greater cutting depth: Single-pass depth of approximately 100mm – ideal for thick aluminum plates or large profiles.
- Higher peripheral speed: Even at 4500 RPM, the tip speed remains high, balancing cutting efficiency with surface quality.
- Professional heavy-duty equipment compatibility: Designed for large table saws, mitre saws, and chop saws – the perfect choice for high-volume processing shops.
Teeth count reference:
| Teeth Count | Cutting Characteristics | Best Use |
|---|---|---|
| 40–60 Teeth | Faster cutting, rougher finish | Rough cutting, material removal |
| 80–100 Teeth (This Blade) | Ultra-smooth, burr-free finish | Precision cutting, profile processing |
| 120+ Teeth | Mirror finish, slowest speed | Ultra-thin wall materials, 极致 surface finish |