Product Specifications
Specification | Details |
Diameter | 350mm / 14" |
Bore Size | 25.4mm / 1" |
Segment Height | 7mm / 9/32" |
Segment Thickness | 3.2mm / 1/8" |
Max. Safe Speed | 4,400 RPM |
Cutting Method | Wet Cutting |
Suitable Materials
Compatible Machines
Application
Safety Instructions
Eye protection
Please wear safety glasses
Hand Protection
Please wear protective gloves
Proper Disposal
Dispose of damaged or worn blades safely
Respiratory Protection
Please wear face respiratory mask
Frequently Asked Questions
Follow these key points to achieve the best performance and longest service life:
Longevity tips:
- Maintain adequate water flow: Insufficient water leads to friction heat and accelerated wear. Ensure a constant and sufficient supply.
- Avoid forcing the blade: The continuous rim has slightly higher cutting resistance – let the blade's weight and machine power do the work. Excessive pressure increases diamond loss and core fatigue.
- "Break in" new blades: Before first use, make a few shallow cuts on a soft material (e.g., old cinder block or sandstone) to expose the diamond grit and improve initial cutting efficiency.
- Clean the blade regularly: Rinse the blade with water after use to remove residual concrete slurry, preventing imbalance during the next use.
Special precautions:
- Do NOT use on metal or rebar‑embedded concrete – this will severely damage the diamond rim.
- Mounting direction: Ensure the arrow on the blade matches the machine's spindle rotation direction.
- Check machine power: A grinder of ≥ 800W is recommended to maintain stable RPM during wet cutting.
- Inspect before each use: Check for cracks, warping, or edge damage – discard immediately if any are found.
This fine cutting diamond blade is designed for precise cutting of tiles, ceramics, marble, granite, and other hard materials. It provides clean edges with minimal chipping, making it ideal for professional and home improvement applications.
This 4½‑inch continuous‑rim diamond blade is specifically designed for fine, smooth cutting of smooth concrete, trowelled concrete, precast concrete panels, and fine stone. It delivers chipping‑free, clean, and straight cut lines, making it ideal for decorative concrete cutting, expansion joint cutting, and pipe trenching where a neat edge is required.
Unlike segmented blades (which have slots for aggressive rough cutting), the continuous‑rim blade features an uninterrupted ring edge with no gaps. This design ensures smoother operation, reduced vibration, and minimises edge chipping, resulting in a polished‑like smooth cut surface. The trade‑off is a relatively slower cutting speed, and it is NOT suitable for cutting rebar‑embedded concrete or rough demolition debris, as that would cause rapid wear.