Product Specifications
Specification | Details |
Diameter | 230mm / 9" |
Bore Size | 22.2mm / 7/8" |
Segment Height | 7mm / 9/32" |
Segment Thickness | 1.8mm / 5/64" |
Max. Safe Speed | 6,500 RPM |
Cutting Method | Wet Cutting |
Adapters | 20mm / 5/8"+16mm / 3/4" |
Suitable Materials
Compatible Machines
Application
Frequently Asked Questions
Follow these key points to achieve the best performance and longest service life:
Longevity tips:
- Maintain adequate water flow: Insufficient water leads to friction heat and accelerated wear. Ensure a constant and sufficient supply.
- Avoid forcing the blade: The continuous rim has slightly higher cutting resistance – let the blade's weight and machine power do the work. Excessive pressure increases diamond loss and core fatigue.
- "Break in" new blades: Before first use, make a few shallow cuts on a soft material (e.g., old cinder block or sandstone) to expose the diamond grit and improve initial cutting efficiency.
- Clean the blade regularly: Rinse the blade with water after use to remove residual concrete slurry, preventing imbalance during the next use.
Special precautions:
- Do NOT use on metal or rebar‑embedded concrete – this will severely damage the diamond rim.
- Mounting direction: Ensure the arrow on the blade matches the machine's spindle rotation direction.
- Check machine power: A grinder of ≥ 800W is recommended to maintain stable RPM during wet cutting.
- Inspect before each use: Check for cracks, warping, or edge damage – discard immediately if any are found.
This fine cutting diamond blade is designed for precise cutting of tiles, ceramics, marble, granite, and other hard materials. It provides clean edges with minimal chipping, making it ideal for professional and home improvement applications.
This 9‑inch (230mm) continuous‑rim diamond blade is engineered for high‑precision, chipping‑free cutting of smooth concrete, trowelled concrete, precast concrete panels, fine stone, and large‑format tiles. It delivers exceptionally smooth, straight, and clean cut lines, making it ideal for municipal expansion joints, airport runway grooving, bridge expansion slots, decorative concrete work, and large precast component finishing.
Compared to a same‑size segmented blade (with gullets for fast rough cutting), the continuous rim features an uninterrupted diamond ring with no gaps. This design ensures minimal vibration and noise, effectively prevents edge chipping, and results in a ground‑like polished finish. The trade‑off is a slower cutting speed, and it is strictly unsuitable for rebar‑embedded concrete or metal, which would rapidly destroy the diamond layer.
Advantage of the 9" large size: Compared to 4½" and 7" blades, the 9" offers a single‑pass cutting depth of approximately 70–80mm, greatly improving efficiency in deep‑cut applications. It is designed to fit 9" (230mm) high‑power angle grinders or cut‑off saws, balancing precision with high productivity.