Product Specifications
Specification | Details |
Diameter | 105mm / 4" |
Bore Size | 22.2mm / 7/8" |
Segment Height | 5mm / 3/16" |
Segment Thickness | 1.9mm / 3/32" |
Max. Safe Speed | 13,300 RPM |
Cutting Method | Wet Cutting |
Adapter Rings | 22.2mm–20mm and 22.2mm–16mm adapter rings |
Suitable Materials
Compatible Machines
Application
Frequently Asked Questions
Follow these key points to achieve the best performance and longest service life:
Longevity tips:
- Maintain adequate water flow: Insufficient water leads to friction heat and accelerated wear. Ensure a constant and sufficient supply.
- Avoid forcing the blade: The continuous rim has slightly higher cutting resistance – let the blade's weight and machine power do the work. Excessive pressure increases diamond loss and core fatigue.
- "Break in" new blades: Before first use, make a few shallow cuts on a soft material (e.g., old cinder block or sandstone) to expose the diamond grit and improve initial cutting efficiency.
- Clean the blade regularly: Rinse the blade with water after use to remove residual concrete slurry, preventing imbalance during the next use.
Special precautions:
- Do NOT use on metal or rebar‑embedded concrete – this will severely damage the diamond rim.
- Mounting direction: Ensure the arrow on the blade matches the machine's spindle rotation direction.
- Check machine power: A grinder of ≥ 800W is recommended to maintain stable RPM during wet cutting.
- Inspect before each use: Check for cracks, warping, or edge damage – discard immediately if any are found.
The continuous rim design delivers smoother and cleaner cuts with less edge damage. It is especially suitable for applications where surface finish and cutting accuracy are important, such as ceramic tiles and decorative stone.
This fine cutting diamond blade is designed for precise cutting of tiles, ceramics, marble, granite, and other hard materials. It provides clean edges with minimal chipping, making it ideal for professional and home improvement applications.